Home Order Now Contact Us FAQ Videos


 ER20 Toolholders
Tool Pallets
Control Modules
Return Policy
Order Now

 Tool Holder Blow Off Feature

The MRT Automatic Tool Changer incorporates a Tool Holder Blow Off feature which uses blasts of air to clean off the Tool Holders each time they are picked up from the Tool Pallet.  Exhaust air from the draw bar solenoid is directed down the side of the Tool Changer through a nozzle.  When the Tool Changer is just above the Tool Holder, the drawbar solenoid is activated a few times (programmable number of times) to remove any debris from the taper of the Tool Holder before the Tool Changer pulls the holder into the taper of the collet chuck on the Tool Changer.  (See video page for demo)







Home • Contact Us • FAQ